 |
   
| |
 Non-Skid
Abrasive Safety Tape
Part Number 17768
Reduce the risk of slips and falls
on ramps, stairs, slick concrete, and tile floors with Mutual’s
non skid abrasive safety tape. Made from black aluminum oxide with
an aggressive adhesive to conform to irregular surfaces, this tape
is extremely durable in high-traffic areas. Acrylic adhesive bond
strengthens with time
and heat for long wear.
- Helps
with OSHA compliance 1910.263(3)
- Prevents
unnecessary slips and falls
Available
stock sizes: 1" x 60', 2" x 60', 4" x 60', 6"
x 60' and die cuts 3/4" x 24", 6" x 24", 5-1/2"
x 5-1/2" in black. Other sizes are also available by special
order. Also by special order are dark blue, lt. blue, green, white,
yellow, red, clear, neon pink, neon orange, and neon yellow. |
|
| |
 Non-Skid
Tape
Part Number 17796 Hazard
Stripe
Part Number 17797 Glo-in-the-Dark
Two versions of Mutual’s high quality non-skid tape
that are ideal for a wide variety of uses. These tapes are two tapes
in one, providing high-visibility marking with non-skid protection. |
|
| |
 Color
Vinyl Aisle-Marking Tape
Part Number 17785
Mutual’s aisle-marking tape is available in every
OSHA-approved color. The durable, 6-mil PVC tape is abrasion, oil
and grease resistant. It is used to mark aisles and pathways, and
is also useful for color-coding applications. Available in 2"
x 36 yd and 3" x 36 yd rolls in the following colors: yellow,
red, white, orange, blue, brown, grey, green, purple, and black.
|
|
| |
 Hazard
Stripe Tape
Part Number 17770
This 7-mil PVC vinyl, pressure-sensitive
tape is required by OSHA 1910.44 to signal physical hazards. It
is available in 2" and 3" widths on 18 yd rolls in black/yellow,
black/white, and red/white colors.
Typical Color Codes:
- Black/Yellow
- Physical Hazard/Caution
- Red/White
- Fire Equipment/First Aid
- Black/White
- Traffic/Housekeeping
- Magenta/Yellow
- Nuclear
|
|
| |
 “Super
Tough” Hazard Stripe
Tape
Part Number 17799
Mutual’s polypropylene laminated
“super tough” hazard stripe tape is an extremely durable,
grease resistant, pressure sensitive tape that is ideal for applications
where an extra measure of wear resistance is required. Available
in 2", 3" or 4" widths in 18 or 36 yd rolls. Other
sizes are also available, please inquire. Available colors: black/yellow,
red/white, black/white.
|
|
| |
 Black Electrical Tape
Part Number 17809-750
This 3/4” X .007 Mil 60’ electrical tape is UL Certified and is packaged in 10 roll sleeves, 20 sleeves per case. Sold by the case only.
|
|
| |
 Duct
Tape
Part Number 17807
Mutual’s DT260 8mil Duct Tape
is a silver polyethylene single coated cloth with high tack rubber
adhesive. Perfect for a variety of utility tasks. Meets UL723 requirements.
2" x 60yd rolls packed 24 per case.
Thickness
Adhesion to Steel
Adhesion to Backing
Tensile Strength ASTM
Elongation
| TEST
DATA |
| Test |
Typical
Value
(Metric) |
Typical
Value |
Test
Method |
| Thickness |
8 mil |
.2 mm |
ASTM D-1000 |
| Adhesion
to Steel |
90 oz/in |
9.9 N/cm |
PSTC-1 |
| Adhesion
to Backing |
40 oz/in |
4.4 N/cm |
PSTC-1 |
| Tensile
Strength |
22 lb/in |
38.5 N/cm |
ASTM D-1000 |
| Elongation |
12% |
12% |
ASTM D-1000 |
|
|
| |
 Hook
and Loop Fastening Tape and Coins
Part Number 152Hook
Part Number 153Loop
Mutual’s hook and loop fastener is ideal for so many
uses. It is great for mounting signs and plaques, holding down equipment
in utility vans and trucks, as well as thousands of other applications.
Aggressive adhesive backing sticks to most surfaces. Packaged in convenient
25 yard rolls. Available in black or white:
Tape: 3/4", 1", 1-1/2", 2", 4" widths in
25 yd rolls
Coins: 3/4" 1050 per roll and 7/8" 925 per roll |
|
| |
Back to Top |
|
|
|